If you leave this unchecked, the drive will be automatically unmapped once you turn off the computer. NOTE: Check the Remember this password in my keychain if you want to have the mapped network drive always available in your computer. To know more about configuring user access for your USB storage device on a Linksys router, click here. Enter their credentials here and click Connect. QUICK TIP: If you have set up specific shares to users, you will be asked to log in using your Name and Password. Under Server Address, enter “smb://router’s IP Address or NAS IP Address” and click Connect. QUICK TIP: Repeat the same steps in Mapping network drive to add more folders from your USB Storage device or Network Attached Storage.Ĭlick Go then select the Connect to Server. If you leave this unchecked, the drive will be automatically unmapped once you turn off the computer.Ī network drive will be displayed in your Computer window and you should now be able to access your USB storage files by clicking on the Network Location icon. NOTE: Tick this box if you want to have the mapped network drive always available in the Computer window. QUICK TIP: If the USB Storage device or Network Attached Storage is partitioned, you will see different folders under the IP Address you selected.Ĭheck the Reconnect at logon box and click Finish. Select the name of your USB Storage device and click OK. Enter their credentials here and click OK. QUICK TIP: If you have set up specific shares to users, you will be asked to log in using your Username and Password. QUICK TIP: You can specify your desired drive letter in the Drive: drop-down section.ĭouble-click on the IP Address of your router. Right-click the Computer icon and click on the Map network drive… option.Įnter the IP Address of the Network Attached Storage or the router with USB storage device and click the Browse… button. NOTE: These steps are applicable to Windows XP, Windows Vista®, Windows 7 and Windows 8. Select your computer’s operating system below for specific instructions: For instructions on how to connect to the wireless network, click here. You will not be able to access your USB storage when you are connected to the Guest network. If you are using a wireless computer, ensure that you are connected to the main wireless network.By default, the IP Address of a Linksys Network Attached Storage is set to 192.168.1.77. If you are connecting to a Network Attached Storage (NAS), you need to know its IP Address.The default IP Address of Linksys routers is 192.168.1.1. Ensure that you have already identified your router's IP Address before mapping (the IP Address of the USB Storage and that of the router are the same).IMPORTANT: Before you start mapping your network drive, you need to: This article will guide you on how to map a network drive or a network storage device. This is configured on computers that want to access a USB storage device or Network Attached Storage (NAS) connected to a router. Network drive mapping is configuring a file folder on a computer to share files or folders of data over a Local Area Network (LAN).
0 Comments
Leave a Reply. |